Alloy valve

Product Details:

Valve size: 2" ~ 40" (DN50-DN1000)

Pressure:ANSI Class 150~2500(PN16-PN420)

Temperature: 196ºC~ 500ºC

Body Materials:Carbon Steel, Stainless Steel, Alloy Steel, Duplex Steel

Trim (Disc/Stem):Carbon Steel, Stainless Steel, Duplex Steel, Alloy Steel

Technical Specifications

Design: ASME 16.34/API 594/API 6D

Face to Face: ASME B16.10

End Flange: ASME B16.5, ASME B16.47

BW End: ASME B16.25

Test: API 598/ API 6D/ BS 6755

Special: NACE MR-01-75

Design Features

Dual plate or single plate.

Spring loaded disc.

Resilient or metal seated.

Retainer or Retainer Less Design

Round, Full Lug or Double Flange

Light-weight & compact design.

Optional plug disc.

Product Details:

We SVR Global, leading manufacturer, exporter and importer of Valves like Ball Valve, Butterfly valve, Trunnion mounted valve, Gate valve, Forged gate, Ball, Butterfly and Check valve. We supply all approved valves for Oil refinery in Middle east, Asia, Africa

Product Details:

Product range:
- Valve size: 2-48" (DN50-DN1200)
- Pressure: ANSI class 150-2500(PN16-PN420) 
- Temperature: -196 to 500°C
- Body materials: carbon steel, stainless steel, alloy steel, duplex steel
- Trim (disc/stem): carbon steel, stainless steel, duplex steel, alloy steel
 Technical specifications:
- Designs: ASME 16.34/API 6D/API 600/BS 1414
- Face-to-face: ASME B16.10
- End flange: ASME B16.5, ASME B16.47
- BW end: ASME B16.25
- Test: API 598/API 6D/BS 6755
- Special: NACE MR-01-75
 Design features:
- OS and Y, rising stem
- Bolted bonnet with spiral-would gasket
- Flexible wedge
- Backseat weld-deposited
- Threaded or welded seat ring
- Renewable seat rings
- Extended bonnet for cryogenic service
- Flanged or butt welded ends
- By pass on request
- Locking device optional

Product Details:

Applicable Standard

Design Standard : API 602, ASME B16.34, BS 5352, DIN3352

Face to Face : ASME B16.10, EN 558, DIN3202

End Flange : ASME B16.5, DIN2533

Buttwelding Ends : ASME B16.25, DIN3239

Socket Welded Ends : ASME B16.11

Threaded Ends : ASME B1.20.1

Inspection and Test : API 598, DIN3230

Products Range

Size : 1/2" ~ 2"(DN15 ~ DN50)

Rating : ANSI 150lb ~ 2500lb

Body Materials : Inconel 600,625,Incoloy 800,800H,825 etc.

Trim : Inconel 600,625,Incoloy 800,800H,825 etc

Bellows : INCONEL 625,600 etc

Operation : Handwheel

Design Features

Solid wedge gate

Full port or reduced port design

Bolted bonnet, welded bonnet, or pressure sealed bonnet

Flanged, butt-welded, socket welded, or threaded ends

Product Details:

Product range:
- Valve size: 2-48" (DN50-DN1200)
- Pressure: ANSI class 150-2500(PN16-PN420) 
- Temperature: -196 to 500°C
- Body materials: carbon steel, stainless steel, alloy steel, duplex steel, Super Duplex
- Trim (disc/stem): carbon steel, stainless steel, duplex steel, alloy steel, Super Duplex
 Technical specifications:
- Designs: ASME 16.34/API 6D/API 600/BS 1414
- Face-to-face: ASME B16.10
- End flange: ASME B16.5, ASME B16.47
- BW end: ASME B16.25
- Test: API 598/API 6D/BS 6755
- Special: NACE MR-01-75
 Design features:
- OS and Y, rising stem
- Bolted bonnet with spiral-would gasket
- Flexible wedge
- Backseat weld-deposited
- Threaded or welded seat ring
- Renewable seat rings
- Extended bonnet for cryogenic service
- Flanged or butt welded ends
- By pass on request
- Locking device optional

Product Details:

Gate Valve
Standard: API, ANSI, ISO, BS, DIN, NF, JIS. ECT
Connect Way: Flanges, Thread, Socket welding, BW
Pressure rating: PN 1.0~25Mpa; Class150~600
Size: DN6~500mm, NPS1/4"~20"
Temp. -198c~+450c
Material:
Tianium: TA1, TA2, TA10, TC4, GR2, GR3, GR5
Nickel Alloy: N6, N201, N200, CZ-100
Hastelloy Alloy: Hastello B(N-12MV, N-7M), Hastello C(CW-12MW)
Hastelloy C276(CW-6MC), Hastelloy C4, Hastelloy G30
Monel Alloy: M-30C, M35-1, Monel 400, Monel 600, Monel K500
Inconel: Inconel 600, Inconel 800, Inconel 690
Duplex Steel: S31803(SAF2205, F51), S32750(SAF2507, F53)
Zirconium: Zirconium 702, Zirconium 705
Austenitic Stainless steel: 904L, 254SMO. 654SMO
Other: NS143/Alloy20, C4

Product Details:

Product Range
-Valve size: 
2" ~ 48" (DN50-DN1200)
-Pressure:
ANSI Class 150~2500(PN16-PN420) 
-Temperature: 
-196ºC~ 500ºC
-Body Materials:
Carbon Steel, Stainless Steel, Alloy Steel, Duplex Steel, Monel, Hastelloy
-Trim (Disc/Stem):
Carbon Steel, Stainless Steel, Duplex Steel, Alloy Steel, Monel, Hastelloy
Technical Specifications   
-Design: ASME 16.34/ API 6D/ API 600/ BS 1414
-Face to Face: ASME B16.10
-End Flange: ASME B16.5, ASME B16.47
-BW End: ASME B16.25
-Test: API 598/ API 6D/ BS 6755
-Special: NACE MR-01-75 
Design Features
-OS & Y, Rising stem
- Bolted Bonnet with spiral-would gasket
-Flexible Wedge
-Backseat Weld-Deposited
-Threaded or welded seat ring
-Renewable seat rings
-Extended Bonnet for Cryogenic Service
-Flanged or butt welded ends.
-By Pass on Request
-Locking Device Optional

Product Details:

Product range:
- Valve size: 2-48" (DN50-DN1200)
- Pressure: ANSI class 150-2500(PN16-PN420) 
- Temperature: -196 to 500°C
- Body materials: carbon steel, stainless steel, alloy steel, duplex steel
- Trim (disc/stem): carbon steel, stainless steel, duplex steel, alloy steel
 Technical specifications:
- Designs: ASME 16.34/API 6D/API 600/BS 1414
- Face-to-face: ASME B16.10
- End flange: ASME B16.5, ASME B16.47
- BW end: ASME B16.25
- Test: API 598/API 6D/BS 6755
- Special: NACE MR-01-75
 Design features:
- OS and Y, rising stem
- Bolted bonnet with spiral-would gasket
- Flexible wedge
- Backseat weld-deposited
- Threaded or welded seat ring
- Renewable seat rings
- Extended bonnet for cryogenic service
- Flanged or butt welded ends
- By pass on request
- Locking device optional

Product Details:

 

Technical Specification

Design Standard: API 6D, ASME B16.34

Face to Face: API 6D, ASME B 16.10

Flanged Ends: API, ANSI, ISO, BS, DIN, NF, JIS

Test & Inspection:API 598

Main Material

Hastelloy B: A494 N12MV, B335 N10001

Hastelloy B-2: A494 N7M, B335 N10665, B335 N10665

Hastelloy C276: A494 CW12MW/CW6M, B564 N10276, B574 N10276

Hastelloy C-4: A494 CW2M, B574 N06455

Hastelloy G: B564 N06007, B581 N06007

Hastelloy G30: B462 N06030, B581 N06030

Sealing ring: PTFE, RPTFE,PPL,PEEK

Pressure Rating: 1.6-10.0Mpa 150-600Lb

Nominal Size: DN15-DN250 1/2”-10”

 

Product Details:

Valve size :2" ~ 24" (DN50-DN600)

Pressure :ANSI Class 150~2500(PN16-PN420)

Temperature :-196ºC~ 500ºC

Body Materials :Carbon Steel, Stainless Steel, Alloy Steel, Duplex Steel

Trim (Disc/Stem) :Carbon Steel, Stainless Steel, Duplex Steel, Alloy Steel

Technical Specifications

Design : ASME 16.34/ API 6D/ API 600/ BS 1873

Face to Face : ASME B16.10

End Flange : ASME B16.5

BW End : ASME B16.25

Test : API 598/ API 6D/ BS 6755

Special : NACE MR-01-75

Design Features

OS & Y, Rising stem

Bolted Bonnet with spiral-would gasket

Conic Disc

Backseat Weld-Deposited

Impact Hand wheel (On Request)

Extended Bonnet for Cryogenic Service

Flanged or butt welded ends.

By Pass on Request

Locking Device Optional

 

 

Product Details:

Pressure :Medium Pressure

Temperature of Media :Medium Temperature

Media :Water

Thread Type :BSP

Actuator Mode :Without Manual And Instruction

Port Size :25mm

Model Number :DN20

Standard or Nonstandard :Standard

Material :Stainless Steel

Structure :Check valve

Product Details:

Specification :
· Standards : API 600/BS1414, API 598/BS EN 12266-1, ASME B 16.10, ASME B 16.5, ASME B 16.25, ASME B 16.34
· Size : 1/8” To 16”
· Rating : 150#,300#,600#,800#,1500#.
· Pressure Rating : 150#,300#,600#,800#,1500#.
· End Connection : Screwed [NPT], Socket Weld, Flanged End, Screwed Parallel, Screwed Taper

Product Details:

Design : API602/ASME 16.34/BS 5352

Pressure Test : API 598

SW Socket welding ends according to ASME B16.11

BW butt end by ASME B16.25

NPT threaded connectors according to ASME B1.20.1

Pressure rating:CLASS 800, CLASS 1500, CLASS 2500

Size range :1 / 4 "to 2"

Materials

Carbon Steel : A105, LF2

Stainless Steel: F304, F304L, F316, F316L

Duplex : F51, F55

Alloy : F1, F5, F5A, F9, F11, F22

 

 

 

 

Product Details:

 

Product range:
- Valve size: 2-48" (DN50-DN1200)
- Pressure: ANSI class 150-2500(PN16-PN420) 
- Temperature: -196 to 500°C
- Body materials: carbon steel, stainless steel, alloy steel, duplex steel, Titanium, super duplex
- Trim (disc/stem): carbon steel, stainless steel, duplex steel, alloy steel, Titanium, super duplex
 Technical specifications:
- Designs: ASME 16.34/API 6D/API 600/BS 1414
- Face-to-face: ASME B16.10
- End flange: ASME B16.5, ASME B16.47
- BW end: ASME B16.25
- Test: API 598/API 6D/BS 6755
- Special: NACE MR-01-75
 Design features:
- OS and Y, rising stem
- Bolted bonnet with spiral-would gasket
- Flexible wedge
- Backseat weld-deposited
- Threaded or welded seat ring
- Renewable seat rings
- Extended bonnet for cryogenic service
- Flanged or butt welded ends
- By pass on request
- Locking device optional

 

Product Details:

 

 

Product Details:

Specifications :API 600/BS1414, API 598/BS EN 12266-1, ASME B 16.10, ASME B 16.5, ASME B 16.25, ASME B 16.34
Material :Incoloy, Incoloy AlloyGrade ,Incoloy 800, Alloy 800
Pressure Rating :150#,300#,600#,800#,1500#.
Size :1/8" to 16"
End Connection :Screwed [NPT], Socket Weld, Flanged End, Screwed Parallel, Screwed Taper

Product Details:

Design/Standard : ASME, API, BS, EN

Specification : API 600/BS1414, API 598/BS EN 12266-1, ASME B16.10, ASME B16.5, ASME B16.25, ASME B16.34

Size : 1/8″~16″

Pressure Rating : Class 150~300~600~800~1500

Grades : Alloy-20 (UNS N08020)

End Connection :NPT, SW, Flanged, Screwed Parallel, Screwed Taper

Product Details:

Product range:
- Valve sizes: 2-36" (DN50-DN900)
- Pressure: ANSI class 150-2500 (PN16-PN420) 
- Temperature: 196 to 500°C
- Body materials: carbon steel, stainless steel, alloy steel and duplex steel
- Trim (disc/stem): carbon steel, stainless steel, duplex steel and alloy steel
 
Technical specifications:
- Design: ASME 16.34/API 6D/API 600/BS 1868
- Face-to-face: ASME B16.10
- End flange: ASME B16.5, ASME B16.47
- BW end: ASME B16.25
- Test: API 598/API 6D/BS 6755
- Special: NACE MR-01-75
 
Design features:
- Bolted bonnet
- Swing type disc
- 6" and larger with an eye bolt
- Disc assembly hinged from bottom of the cover
- Metal/renewable disc available
- Confined bonnet gasket
- Flanged, butt weld, threaded and socket weld end connections available
- Bypass on requests
- Lever and weight optional

Product Details:

Product Description:

Medium force against operation automatically open and close the valve flap, the valve flap to increase the weight off quickly, increasing the hydraulic slow closing of the valve flap, to prevent pipe vibrations, may also be manually opened and the valve flap in the open position of the lock cleaning pipeline.

1. Size: 2"~32" (DN50~DN800)

2. Working Pressure: 150Lb~2500Lb

3. Working Temperature: -20°C~425°C

4. Suitable Medium: Water, Oil, Gas and Steam.

5.Forged Materials:A105N,F304,F304L,F316,F316L,F11,F22,F51,F55

Technical Specification:

A. Design &Manufacture standard: API 594,BS 1868

B. Face to face: ASME B16.10. DIN3202.

C. Pressure &Temperature standard: ASME B16.34

D. Flange standard: ASME B16.5, ASME B16.47. JIS B2220. DIN 2543-2550

Product Details:

Standards : JB, API, ANSI, ISO, BS, DIN, NF, JIS, etc.
Connect type :Flanges ends. Welded ends, Thread ends.
Structure :Straight-through type, Angle type, Oblique type
Driving mode :Handle driving, Worm wheel/gear driving, Air operated, Electric driving
Pressure :PN1.0MPa~PN10.0 MPa, Class150~600Size :DN15~400mm, NPS1/2”~ 16”
Temperature :-29 ~ +550
Medium :Water, Oil, gas and corrosive fluidMaterial range Titanium :GR1, GR2, Gr3, Gr5 GR7, GR12, GR17,
Nickel :N6, N201, N200, CZ-100
Hastelloy alloy :Hastelloy BN-12MVN-7M, Hastelloy C CW-12MW) , Hastelloy C276 CW-6MC, Hastelloy C4, Hastelloy G30Monel
alloy :M-30C M35-1, Monel 400, Monel 600, Monel K500
Inconel :Inconel 600, Inconel 800, Inconel 690
Duplexsteel:S31803(SAF2205,F51),S32750(SAF2507,F53)
Zirconium :Zirconium 702, Zirconium 705

Product Details:

 

Application Specifications:
1.Design and manufacture conform to BS5352
2.Socket welded ends conform to ANSIB16.11
3.Screw ends conform to ANSI B1.12.1

4.Butt-welded ends conform to ANSI B16.25

5.Test and inspection conform to API598

6.Material conform to ANSI/ASTM