AWWA Valves

Product Details:

Specification:

Pressure:High Pressure

Power:Manual

Media:Water

Port Size:11/2" to 40"

Structure:Check

Design & Manufacture:API 6D, ASME B16.34

Pre-Temp. Rating:ASME B16.34

Pressure Range:PN10~PN420, CLASS150~2500

End sconnection:ASME B16.5/16.47

Inspect & Test:API 598

Temperature of Media:Medium Temperature

 Main Part & Materials:

 

Product Details:

1.Size:DN40-DN600;2’’-24’’

2.Medium:water

3.Standard:EN593/AWWA C504/MSS SP-67

4.Pressure:CLASS 125-300/PN10-25/200-300PSI

5.Material:CI,DI

6.Type:wafer type,lug type,double flange type,U type,groove-end

 

TECHNICAL REQUIREMENT :

1.Design and Manufacture  Conform to AWWA C504

2.Flange dimensions  Conform to ANSI B16.1 CLASS 125

3.Face to Face  dimensions Conform to AWWA C504 Short Body

4.Testing Conform to AWWA C504

5.Driving mode: lever, worm actuator, electric, pheumatic

Product Details:

Body: GGG50(Ductile Iron)
Disk: GGG50
Shaft: SS420
Sealing ring: brass
Suitable media: water
Operated way: with counter weight
Valve Size range: DN200 to DN1000
Check Valve Working pressure: 125 LB TO 300LBS

Product Details:

1. Conforms to AWWA C509/C515, MSS-SP-70
2. Fusion Bond Epoxy Coated Interior and Exterior, AWWA C550. Epoxy Powder Certi???ed to NSF-61.
3. 2” square nut or optional handwheel at customer’s request.
4. Open right valves supplied with red operating nut.
5. Temperature: 2°C (35°F) to 82°C (180°F)
6. Working Pressure: 3”~24”  - 250 psi - 30”~48” - 150 psi (2”~16” FM rated)
7. Flanged ends conform with ANSI B16.1 Class 125

Product Details:

1.DN/NPS: DN150 – DN2600 (6” – 104”)
2.Operating pressure: 150 PSI, 250 PSI
3.Flange connection: ANSI CL150-ASME B16.1
4.Top flange: EN ISO 5211 F rating
5. Face to face length: AWWA C504 short body
6. Test standard: AWWA C504 / NSF 61/372
7.Application: Dams & hydropower, Industrial, Irrigation, Power plants, Sewage & wastewater treatment, Water treatment

Product Details:

1. Ductile Iron Body & Disc
2. Full Rubber Lining on flanged valves
3. AISI 420 Stainless Steel shaft
4. Fusion Bonded Epoxy Coating
5. ISO 5211 Mounting Plate
6. 250 PSI operating pressure
7. Ductile Iron Disc with 316 Stainless Steel disc edge

 

SPECIFICATIONS:

Temperature of Media: Low Temperature

Pressure: Low Pressure

Power: Manual

Media: Water

Port Size: 16"~144"

Structure: Butterfly

Characteristic: AWWA C504 Butterfly Valve

Design & Manufacture: AWWA C504Pre-Temp.

Rating: ASME B16.34

Face To Face: AWWA C504

End Connection: Wafer, MJ, Grooved and Flanged

Inspect & Test: API 598

Standard or Nonstandard: Standard

Product Details:

1. Conforms to AWWA C515-09, MSS-SP-70
2. Epoxy coated inside and outside to AWWA C550.
3. Working Pressure: working pressure: 2”~12” - 300 psi. working pressure: 14”~16” - 250 psi. working pressure: 18" - 250 psi working pressure: 20”~24” - 200 psi. working pressure: 18" - 24" - 200 psi
4. Temperature: 6°C (42°F) to 82°C (180°F)
5. Flanged ends conform to ANSI B16.1 standard.
6. Grooved ends conform to AWWA C606 standard.
7. All sizes come with NPT tapped test ports and plugs.
8. Sizes 14"~18" come with "eye bolts" for ease of handling and installation.

Product Details:

Material: Body and Cover: Cast Iron, ASTM A126 Class B, or Ductile Iron,

ASTM A536 Grade 65-45-12

Body Seat Ring: Stainless Steel,

Type: 304 (Standard), Stainless Steel,

Type 316 (Optional)Rotor: Ductile Iron

ASTM A536 Grade 65-45-12Rotor

Seat: Ultra High Molecular Weight Polyethylene (UHMWPE)

Bearings/Bushings: Bronze, CDA 93200

Shaft: Stainless Steel, Type 303

Shaft Packing & Seals: Buna-N (Standard), EPDM (Optional)

TECHNICAL SPECIFICATIONS:

Material:CF8/ CF8M/ WCB

Temperature of Media:Medium Temperature

Pressure:1.6-6.4 MPa, 150-300L, 10K, 20K

Power:Manual

Media:water, oil, gas

Port Size:DN100-400mm

Structure:Fixed Ball Valve

Available actuator:Handle/Wormgear/Pneumatic/Electric

Design standard:API6D, BS5351

Pressure-temperature standard:ASME B 16.34

Structure length:ASME B16.10, BS4460, DIN3202

Flange standard:ASME B16.5a,DIN2543-2546,BS4504,JIS B2213-2216

 

Product Details:

• Sizes: 3" - 20"
• Body Style: Wafer-type
• Pressure Class: Class 150B per AWWA Standard C504
• Working Pressure: 150 psig
• Rubber Seat: Bonded seat-in-body extends over inner surface to form self-gasketing feature

Product Details:

• Available in size 4" - 60"Available in AWWA classes 150lb. and 300lb.100x more efficient than automatic control valves
• Superior flow characteristics for controlling flow and pressure100% Flow Area - equal to the pipe size
• Best selection for surge control
• Available with Cylinder, Motor or Manual Actuation
• Proof of design and independently flow tested
• Manufactured under a certified ISO 9001 quality system

SPECIFICATIONS:

Material: Ductile iron

Pressure: Low Pressure

Media: Water

Port Size: DN50 - 150

Application: Water

Temperature of Media: Normal Temperature

Working Pressure: PN10/PN16, Class 125/150

Shell Pressure :PN15/PN24, 300PSI

Seat Pressure: PN11/PN17.6, 200PSI

Bonnet :Ductile IronBall:EPDMStem:2Cr13

Product Details:

• Cast stainless steel body, packing gland, and yoke.
• Rubber seat provides a BI-DIRECTIONAL drip tight seal across the gate from 0 to 150 PSI.
• Gate design withstands full 150 PSI rated pressure as required by MSS SP-81.
• Bi-directional Buna resilient seat standard. Also available in EPDM, Viton, Neoprene and other materials. See reverse side for temperature limits.
• Compact wafer configuration to TAPPI and MSS standard face-to-face.
• Heavy duty body design resists deflection from line loads and internal pressure.
• Rubber seat is flush with the bottom of the port ELIMINATING any pockets in the bottom of the valve that will collect media material.
• Smooth flow non-clogging full port design.
• Heavy duty cast stainless steel yoke will not bend or twist under extreme loads.
• Easy conversion from handwheel operator to hydraulic or pneumatic cylinder, bevel gear, chainwheel, electric motor, or fail safe spring cylinder operator using existing cast yoke.
• Bonnetless, outside screw and yoke, non-rising handwheel, and rising stem.
• Enclosed bronze stem bushing provides reduced operating torque and protection of the stem bushing in harsh environments.
• Stainless steel stem resists corrosion.
• Standard TFE lubricated synthetic packing (TLSP).
• Full port ID.
• MSS SP-81 Stainless Steel, Bonnetless, Flanged Knife Gate Valves.
• AWWA C520-10 Knife Gate Valves, 2in.—96in.

Specifications:

Material: Stainless Steel

Temperature of Media: Normal Temperature

Pressure: Low Pressure

Power: Manual

Media: Water

Port Size: Customized

Structure: Gate Standard or Non standard: Standard

Body material: Stainless steel

Working pressure: Normal

Valve type: Knife gate valve

Connection: Flange Ends

Medium: Water

Product Details:

Body Construction: Grooved End

Face to face: MSS SP-67

Groove acc.to: AWWA C606

Top flange: EN ISO5211

Max Working pressure: PN16

Temperature: -20 to 140 

Operation: Lever, Hand wheel, Electric Actuator, Pneumatic Actuator

Coating: Epoxy Coating

Disc: Bronze / Ductile iron rubber volcanized EPDM/NBR/Hypalon

Tightness test: To EN12266-1:2003
Body: Ductile Iron
Option Lining: Stainless Steel
Option Lining:  EPDM/ NBR

Shaft: SS316/ SS420/ Duplex

Bushing : Brass/ Nylon

Washer: Galvanized Steel

Sealing Ring:  Fiber

O-Rings: NBR/ EPDM

Product Details:

Size Range: 2" - 72"
Temperature Range: Up to 120°C
Pressure Rating: PN10, PN16, PN25
Connections: Flange, Mechanical Joint, FLxMJ, Tapping
Body Material: Ductile Iron, Stainless Steel
Operating: gear box, electric actuator, Handwheel, Chainwheel
Seal Options: Resilient Wedge Seated, Metal Seated
Styles: None Rising Stem, Outside Stem and Yoke

Product Details:

• Ductile Iron
• 300 PSI Non-Shock CWP
• Bolted Cover
• Bronze Seat & Resilient Disc
• Outside Lever & Weight or Optional Spring Kit Available
• Fusion Bonded Epoxy Coating Inside & Outside – AWWA C550
• MSS SP 71 Compliant
• AWWA C508 Approved
• NSF/ANSI 61
• Flanged Ends Conform with ANSI B16.1
• For Horizontal & Vertical Installation

Product Details:

1.Size:DN50-DN600;2’’-24’’
2.Medium:water
3.Standard:EN12334/BS5153/MSS SP-71/AWWA C508
4.Pressure:CLASS 125-300/PN10-25/200-300PSI
5.Material:Cast Iron,Ductile Iron
6.Type:wafer,swing

TECHNICAL REQUIREMENT
1. Working pressure: 1.0/1.6MPa
2. Working temperature:NBR: 0℃~80℃,EPDM: -10℃~120℃
3. Face to face: DIN3202 F6
4. Flange standard: EN1092-2, ANSI125/150
5. Testing: DIN3230, API598
6. Medium: Fresh water, sea water, food, all kinds of oil etc.