SVR VALVES
P N Palayam, Coimbatore, Tamil Nadu
GST No. 33DGZPR2894P2ZZ
TrustSEAL Verified
Call 0804764002877% Response Rate
SEND EMAIL
Product Details:
| Media | Gas, Air, Water, Fuel, Powder/Solids |
| Temperature of Media | Low Temperature, High Temperature, Medium Temperature, Normal Temperature |
| Port Size | 2 to 44 inch |
| Operator | Electric Actuator, Lever |
| End Connection | Wafer, Lugged, Flanged, Butt Weld or Grooved |
| Condition | New |
| Operation Type | By Gear, By Actuator, By Motor, By Lever |
| Brand | SVR |
| Is It Customized | Customized |
| Material | Stainless Steel |
| Power | Hydraullic |
| Working Temperature | -196 - 550 Deg C |
| Pressure Rating | Class150~600, PN10~PN100 |
Product Description:
Body Material: Carbon Steel, Stainless Steel, Alloy Steel, Duplex Steel, etc.
Disc Materials: Carbon Steel, Stainless Steel, Duplex Steel, etc.
Seat Material: Stainless Steel + Graphite or PTFE + Stainless Steel
Optional Stellite Seat Offers Optimum Resistance to Erosion
Bubble-Tight Closure Provides Process Efficiency with Reduced Maintenance
Triple Offset Design Eliminates Wear Associated With Sealing Surface Contact
Size Range: NPS 2” - 60” ; DN50 - DN1500
Pressure Rating: Class 150 / Class 300 / Class 600 ; PN10 / PN16 / PN25 / PN40
Wafer type, Lug type and Double Flange type are all available
Mode of Operation: Handle Lever, Gearbox, Worm Gear, Electric, Pneumatic
Technical Specifications:
Design and Manufacture: MSS SP-68, API 609
Face to Face Dimensions: ASME B16.10, EN 558, ISO 5752, DIN 3202
Flange Ends Dimensions: ASME B16.5 or DIN 2501 PN10 / 16 / 25 / 40 or BS 10 Table D and E or AS 2129 Table D and E
Inspection & Test: API 598 , ISO 5208, DIN 3230
Top Mounting Pad Standard: ISO 5211
Product Details:
| Brand | SVR |
| End Connection | Screw End,Flange End,BW,SW |
| Operator | Lever |
| Valve Size | From 3\8" ~ 60 " ( bigger size as per customer requirement can also be supplied ) |
| Media | Water |
| Temperature of Media | Medium Temperature |
| Operation Type | By Lever |
| Operation | Manual and remote control |
| Special Range | Double Bleed & Block,Through Conduit,Pressure seal Bonnet |
| Standards | API 6D,API 6A,DIN,ANSI,BS,JIS |
| Available Material | Cast iron,Ductile cast iron,Carbon steel,Stainless steel |
| Pressure Class | ANSI 150-2500,API 1000 psi,DING PN10-PN160,JIS 5K-30K |
Main Material:
1-Body: Cast Iron, Ductile Iron, Cast Steel, Bronze
2-Disc: DI or WCB with galv, Stainless Steel, Bronze
3-Pin: Stainless Steel
4-Seat: NBR, EPDM,CR,FKM,VITION,PTFE
5-Stem: Stainless Steel
Additional Information:
Product Details:
| Valve Size | 2 inch to 48 |
| Media | Gas, Water, Air |
| Pressure | Low Pressure |
| Brand | SVR |
| Temperature of Media | High Temperature, Normal Temperature, Medium Temperature |
| Operator | Lever, Electric Actuator |
| End Connection | Wafer,Lugged,Flanged RF,FF |
| Condition | New |
| Operation Type | By Motor, By Actuator, By Gear, By Lever |
| Is It Customized | Customized |
| Material | Stainless Steel |
| Standard Compliance | API 609. DIN3202,MSS-SP-68,BS 5155 |
| Optional Seat Ring | Resilient NBR,EPDM,VITON |
| Size Range | 50 - 1200 mm |
| Pressure Rating | Class150,PN10,PN16 |
| Materials | Cast Iron,Ductile Iron |
Specification
|
1 |
Valve body |
Grey iron |
|
2 |
Disc |
Cast steel, stainless steel |
|
3 |
Stem |
2Cr13 |
|
4 |
Extension tube |
Grey iron |
|
5 |
Gland |
Gentle graphite |
Performance:
|
1 |
Nominal pressure: |
1.0MPa |
|||
|
2 |
Working medium |
Oil, water |
|||
|
3 |
Working temperature: |
≤80??? |
|
||
Basic features:
|
1 |
good seal ring and appearance, flexible switch. |
|
2 |
It is widely used in the water supply, draining and gas pipelines. |
|
3 |
It is suitable in the fields of food, medicine, chemical industry, petroleum, electric powder, textile industry, paper making etc. |
|
4 |
It has the functions of adjusting flux, intercepting medium and compensating the heat up and cold shrink. |
Product Details:
| Minimum Order Quantity | 50 Piece |
| Brand | SVR |
| Pressure | Class 150 to 600 |
| Port Size | 2" to 12" |
| Media | Powder/Solids, Water, Air, Fuel, Gas |
| Material | Carbon steel, Stainless steel, Alloy steel |
| Temperature Of Media | Normal Temperature, Low Temperature, High Temperature, Medium Temperature |
| Operation Type | By Actuator, By Gear, By Lever |
| I Deal In | New Only |
Body material: Carbon steel, Stainless steel, Alloy steel
Nominal diameter: 2"- 180,DN50-DN4500
Pressure range:Class150,600,PN10-PN100
End connection: RF, RTJ
Working temperature:-46+200
Operation : wrench, worm gear, electric, etc.
Product Details:
| Minimum Order Quantity | 50 Piece |
| Brand | SVR |
| Material | Carbon steel, Cast iron, Stainless steel, Ductile iron |
| Pressure | Low Pressure |
| Port Size | DN 50 to DN 2000 |
| Media | Water |
Nominal Size: DN25 to DN1200
Operated Type: Pneumatic Actuator,Electric Actuator,Manual Hand Lever,Worm Gear
Work Pressure: PN6,PN10,PN16
Work Temperature : -15-85°C,-25-150°C,-15-85°C,-25-200°C
Seal Material : EPDM, PTFE, NBR,VITON
Disc Material : SS304/SS316,Aluminum Bronze,Nylon,Ductile Lron
Body Material : Ductile Iron, SS304/SS316,WCB,Aluminium Alloy
Medium : Water,Oil,Gas
Product Details:
| Minimum Order Quantity | 50 Piece |
| Material | Carbon steel,Cast iron,Stainless steel,Ductile iron |
| Brand | SVR |
| Port Size | DN 50 to DN 2000 |
| Operator | Electric Actuator |
| Media | Water |
| Connection Type | Flanged |
Nominal Size: DN25 to DN1200
Operated Type: Pneumatic Actuator,Electric Actuator,Manual Hand Lever,Worm Gear
Work Pressure: PN25,PN10,PN16
Work Temperature: -15-85°C,-25-150°C,-15-85°C,-25-200°C
Seal Material: EPDM,PTFE,NBR,VITON
Disc Material: SS304/SS316,Aluminum Bronze,Ductile Iron
Body Material: Ductile Iron,SS304/SS316,WCB,Aluminium Alloy
Medium: Water,Oil,Gas
Connection Standard: PN10/PN16,ANSI150,DIN16
Product Details:
| Minimum Order Quantity | 50 Piece |
| Brand | SVR |
| Material | Carbon Steel,Cast Iron,Ductile Iron,Stainless Steel |
| Operator | Electric Actuator |
| Media | Powder/Solids, Gas, Water, Fuel, Air |
| Temperature Of Media | High Temperature, Normal Temperature, Medium Temperature, Low Temperature |
| Operation Type | By Lever, By Actuator, By Gear, By Motor |
| Size | 1" to 32" |
| Is It Customized | Customized |
| I Deal In | New Only |
Body Material: Cast Iron, Ductile Iron
Key: ASTM 1045
Body coated rubber: ASTM A536 65-45-12+EPDM/NBR
Garter spring: AISI 1066
Gasket: Stainless steel
Sealing ring: Rubber
Shaft: ASTM A276 304
Upper bushing: ASTM S304+F4
Pin: ASTM A276 304
Nut: ASTM S304
Gasket: ASTM S304
Disc: ASTM A536 65-45-12+SS316
Lower bushing: ASTM S304+F4
Bottom cover: ASTM A536 65-45-12
Bolt: Stainless steel
Gasket: Stainless steel
Bolt: Stainless steel
Product Details:
| Minimum Order Quantity | 50 Piece |
| Material | Ductile Iron,Ductile Iron, Cast Iron, Stainless Steel |
| Pressure | Low Pressure |
| Power | manual/electric/pneumatic |
| Temperature | Low Temperature |
| Port Size | DN 50 to DN 2000 |
Working Pressure : 150psi
Testing Pressure : Shell:300psi
Seal:165psi
Working Temperature : -4°F to 230°F EPDM Seat
14°F to 176°F NBR Seat
Suitable Media : Water, Oil & Gas
Body : Ductile Iron - A536 Gr. 65-45-12
Desc : Ductile Iron - A536 Gr. 65-45-12
Bronze - B148 C95400
Stainless Steel - A351 CF-8
Stainless Steel - A351 CF-8M
Shaft : Stainless Steel - A276 S 410 00
Stainless Steel - A276 S 410 00
Seat Ring : EPDM/NBR
O-Ring : EPDM/NBR
Bushing : Bronze - B62 C83600
Product Details:
| Minimum Order Quantity | 50 Piece |
| Brand | SVR |
| Material | Carbon steel, Cast iron, Stainless steel, Ductile iron |
| Size | DN 50 to DN 2000 |
| Temperature of Media | Medium Temperature, Normal Temperature, High Temperature, Low Temperature |
Size: 2"-120";DN50-DN3000
Pressure Rating: ASME CLASS 150-600
Body Material: Carbon Steel, Stainless Steel, Alloy Steel
End connection: Wafer, Lug, RF
Operation: Lever,Gear,Pneumatic,Electric, Hydraulic
Product Details:
| Minimum Order Quantity | 50 Piece |
| Brand | SVR |
| Material | Carbon steel, Cast iron, Stainless steel, Ductile iron |
| Port Size | DN 50 to DN 2000 |
| Media | Water |
Nominal Size: DN25 to DN1200
Operated Type: Pneumatic Actuator,Electric Actuator,Manual Hand Lever,Worm Gear
Work Pressure: PN6,PN10,PN16
Work Temperature: -15-85°C,-25-150°C,-15-85°C,-25-200°C
Seal Material: EPDM,PTFE,NBR,VITON
Disc Material: SS304/SS316,Aluminum Bronze,Ductile Iron
Body Material: Ductile Iron,SS304/SS316,WCB,Aluminium Alloy
Medium: Water,Oil,Gas
Connection Standard: PN10/PN16,ANSI150,DIN16
Product Details:
| Brand | SVR |
| Material | Ductile Iron,Carbon steel, Cast iron, Stainless steel, Ductile iron |
| Pressure | Medium Pressure,Normal Temperature |
| Port Size | 4 inch,DN50-DN200 |
Valve body wall thickness:AWWA C504,ASME B 16.34
Top flange:ISO5211
Design standard:ISO5208,AWWA C504,ASME B16.34
Face to face:API 609,ISO 5752
Leakage class:RATE A EN 12266-2( zero leakage)
Flange marking system:MSS-SP-25
Pressure test:ISO 5208
Valve body material:Cast iron,Carbon steel,Stainless steel,Duplex steel.
Valve stem material:stainless steel
Valve seat material:EPDM,NBR,PTFE,FKM,Silicone Rubber
Drive:handle,handwheel,electric,pneumatic
Application:water supply,waste water,buildings,food,textile,power,shipping,energy,etc.
Product Details:
| Media | Water |
| End Connection | Flanged,lug,wafer |
| Valve Size | 2 inch to 48 inch |
Name:Cast Iron Worm Actuated Butterfly Valve
Size:DN40-DN300mm,1.6"-12"
Pressure class:PN1.0-1.6MPa
Connection type:Wafer
Structure type:Centric type
Standard:API 509, DIN 3202, API 598
Operation Way:Handle
Suitable Temperature EPDM:-30???+120???
NBR:-30???~+80???
PTFE:-30???+180???
VITON:-30???+150???
Applicable medium:Water, liquids, gas, oil, powder, steam, acid-base medium, etc.
Parts Material
Body:Cast Iron, Ductile Iron, Carbon Steel etc.
Disc:Aluminum Bronze, Stainless Steel
Stem:SS410/SS420/SS416/SS304/SS316/Monel
Seat lining:EPDM,NBR,VOTON,PTFE
Packing:Graphite/PTFE
Gearbox:Ductile Iron,Carbon Steel etc.
Product Details:
| Brand | SVR |
| Media | Water |
| Pressure | High Pressure |
| Temperature of Media | High Temperature |
| Operator | Lever |
| Model | D41X-10/16 |
| Nominal diameter | DN50-200mm |
| Nominal pressure | PN1.0MPa-1.6MPa |
| Suitable medium | Water, gas, oil, ect |
| Suitable temperature | -23 deg C - 121 deg C |
| Part Name | Material |
| Valve Body | Cast Iron or Ductile Iron |
| Hand Bar | Cast Iron or Aluminum or Carbon Steel or Malleable Steel |
| Valve Disc | Ductile Iron or Stainless Steel |
| Seal Material | EPDM or NBR |
| Stem | Carbon Steel or Ductile Iron or Stainless Steel |
Additional Information:
Product Details:
| Minimum Order Quantity | 50 Piece |
| Construction | Cast Iron,Carbon Steel,Stainless Steel,Ductile Iron |
| Media | Gas, Water, Powder/Solids, Air, Fuel |
| Brand | SVR |
| Temperature Of Media | Normal Temperature, Low Temperature, High Temperature, Medium Temperature |
| Nominal Diameter | DN50-1200mm |
| Is It Customized | Customized |
| I Deal In | New Only |
| Nominal pressure | PN1.0MPa-1.6MPa |
| Suitable medium | Water,gas,oil,ect |
| Suitable temperature | -23 deg C - 121 deg C |
Specifications:
Size Range: DN100
Pressure: PN6/10/16
Clas: 150
Body Materials: Ductile Iron
Seat Materials: EPDM/NBR
Disc Materials: DI/SS304/SS316/C954
Stem Materials: 420/45/SS304/SS316
Product Details:
| Brand | SVR |
| Media | Water, Gas, Air, Fuel |
| Temperature of Media | Medium Temperature |
| Boby Lining | Rubber Lined |
| Ends Connection | Wafer,Lugged, Double Flanged |
| Pressure Rating | Class150, PN10, PN16 |
| Size Range | 2 - 24 Inch |
| Working Temperature | -20-150 Deg C |
Main Material:
|
Name |
Material |
|
Body |
Cast Iron Ductile Iron Carbon Steel Stainless Steel AL-Bronze |
|
Disc |
Ductile Iron Carbon Steel Stainless Steel AL-Bronze |
|
Shaft |
Stainless Steel Monel K500 |
|
Seat |
BUNA NBR EPDM VITON PTFE HEPDM Neoprene Hypalon Natural rubber |
Technical Parameters:
|
Size |
DN32-DN600 |
DN650-DN2000 |
|
Working pressure |
16Bar |
10Bar |
|
Shell |
24Bar |
15Bar |
|
Seal(Air) |
6Bar |
6Bar |
|
Operating Temperature |
-40???~+160??? |
|
|
Operating Environment |
Ballast and bilge system Chemical processing Desalination plants Drilling rigs Drinking water Dry powder Food and beverage Gas plants HAVC Mining industry Paper industry Sand handling Seawater Sugar industry Thermo technical water treatment Waste water |
|
|
Driving method |
Hand Lever Worm Gear Electric Pneumatic |
|
Executive Standard:
|
Design Standard |
EN 593 , MSS SP67 API 609 BS5155 |
|
Inspection & Test |
API 598 ISO 5208 EN 12266 |
|
End Standard |
ANSI B16.1 CL. 125LB & B16.5 CL. 150LB AS 2129 Table D & E BS 10 Table D & E DIN 2501 PN6, PN10 & PN16 EN 1092 PN6, PN10 & PN16 ISO 2531 PN6, PN10 & PN16 ISO 7005 PN6, PN10 & PN16 KS B 1511 / JIS B 2210 5K & 10K MSS SP44 CL. 150LB AWWAC207 SABS 1123 Table 1000/3 & Table 1600/3 |
|
Face to Face |
ISO 5752 , EN 558 , MSS SP67 and API 609 DIN3202 |
|
Top Flange |
ISO 5211 |
Product Details:
| Valve Size | 2 to 44 inch |
| Brand | SVR |
| Media | Fuel, Air, Water, Gas |
| Temperature | 20 -150 Deg C |
| Material | Cast Carbon steel, Stainless steel, Duplex |
| Boby Lining | FEP, PFA and etc |
| Pressure Rating | Class150, PN10, PN16 |
| Size Range | 2 - 24 Inch |
| Standard Compliance | API 609. DIN3202, MSS-SP-68, BS 5155 |
The Fully Fluorine Lined Butterfly Valve is designed for aggressive chemical and ultra-pure applications. Fluorine lined resists chemical attack from most known chemical compounds, and with a flexible liner design ultilizing a full width, 360 degree, resilient back up liner offers bubble tight shut off in even the most demanding installations. Redundant shaft seals provide a tight, reliable seal to the environment. This is a maintenance free valve design which uses long life sleeve bearings and avoids the use of an adjustable packing gland. The valve shall be a 90 turn clockwise to close, non-jamming, resilient seated valve for zero leakage service. The valve shall be torque seated and designed in such a manner that the disc can be rotated the seat with out the actuator. Also this valve enables the fluid perfect shut-off regardless of the flow direction.
| Body material | Ductile Iron,cast iron,cast steel, stainless steel |
| Standard | API, DIN, JIS, GB |
| Connection | Flange |
| Certificate | ISO9001:2008 TS,CE,API |
| Application | Petorleum,Chemical,Medicine,Fertilizer,Food and corrosive medium. |
| Function | butterfly. |
| Feature | Anti-corrosion,Simple structure,Sealing feature is good. |
| Lined material | PTFE FEP PFA PO FRPP |
| Suitable temperature | ≤180??? |