SVR VALVES
P N Palayam, Coimbatore, Tamil Nadu
GST No. 33DGZPR2894P2ZZ
TrustSEAL Verified
Call 0804764002877% Response Rate
SEND EMAIL
Product Details:
| Minimum Order Quantity | 50 Piece |
| Brand | SVR |
| Size | DN 50 to DN 2000 |
| Material | Carbon steel,Cast iron,Stainless steel,Ductile iron |
| Connection | Flanged,NPT,BSPT |
| Valve Body | Carbon steel,Duplex,SS304,316 |
| I deal in | New Only |
Product Details:
| Minimum Order Quantity | 50 Piece |
| Brand | SVR |
| Valve Size | DN 50 to DN 2000 |
| Material | Carbon steel, Cast iron, Stainless steel, Ductile iron |
| Media | Water, Fuel, Gas, Air |
| Operating Height | 25 ft, 10 ft, 20 ft, 15 ft |
| Port Size | 1/2 Inch, 1/8 Inch, 1/4 Inch |
| I Deal In | New Only |
ELECTRIC FLOW CONTROL VALVE
Port size: DN25~300, NPS 1 ~ 12
Pressure: PN16 ~ 100,150LB ~ 600LB
Medium: Water,liquid
Temperature :-20 ~120
Body material: WCB, LCB, CF8, CF3, CF8M, CF3M
Connection: Flange
Position type: Flow to open,flow to close
Characteristic: Linear, percentage, quick open
Voltage: AC220V,AC380V, other voltage customed
Other: Different electric actuator is optional
ELECTRIC FLOW CONTROL VALVE SPECIFICATION
Electric control valve
Body type : straight through casting globe type
Spool type : non-balanced single seat plug type
Nominal size : DN20~200, NPS 3/4 ~ 8
Nominal pressure : PN16 ~ 100, CLASS 150LB ~ 600LB
Connection: flange : FF, RF, MF, RTJ
Welding : SW, BW
Flange dimension :According to to IEC 60534
Bonnet type :standard type -20~230
Radiator type: -45~ high than 230 occasion
Low temperature extended type: -196 ~ -45
Bellow seal type
Warm insulation Jacket type
Gasket : Metal graphite packing
Actuator : Electric: 3810L series smart actuator, PSL series actuator.
ELECTRIC FLOW CONTROL VALVE MATERIAL
Component name : Control Valve Material
Body/Bonnet : WCB/WCC/WC6/CF8/CF8M/CF3M
Valve spool/Seat : 304/316/316L(overlaying stellite alloy)
Packing :N ormal:-196 150 is PTFE,RTFE,>230 is flexible graphite
Bellows : 304/316/316L
Gasket Normal : Stainless steel with flexible graphite,Special:Metal tooth type gasket
Control valve stem : 2Cr13/17-4PH/304/316/316L
ELECTRIC FLOW CONTROL VALVE PERFORMANCE
Flow characteristic : Linear, percentage, quick open
Allowable range : 50: 1 (CV<6.3 30: 1)
Rated Cv value : Percentage CV1.6~630 linear CV1.8~690
Electric control valve Allowable leakage : Metal seal: IV grade 0.01% rated capacity
Soft seal : VI grade foam grade
Electric flow control valve Performance
Intrinsic error (%)±1.0
Return difference(%) ≤1.0
Dead zone(%) ≤1.0
Difference from beginning to end point(%) ±2.5
Rated travel difference(%)≤2.5
ELECTRIC FLOW CONTROL VALVE ACTUATOR PARAMETER
Electric control valve Type/ Method : Electric actuator
Air supply pressure or Power supply voltage Power : AC 200V±10% 50Hz
Or Power : AC 380V±10% 50Hz
Connector Normal type : cable inlet 2-PF(G1/2)
Explosive proof : Protection jacket PF(G3/4)
Input signal : Input/output4 to 20mA.DC
Lag ≤0.8%FS
Linear type ≤+1%FS
Environmental temperature Standard type: -10+60
With space heater : -35+60
Explosive proof: -10+40
Product Details:
| Minimum Order Quantity | 50 Piece |
| Brand | SVR |
| Material | Carbon steel,Cast iron,Stainless steel,Ductile iron |
| Fluid Media | Powder, Gas, Fuel, Water, Air |
| Size | DN 50 to DN 2000 |
| I deal in | New Only |
ELECTRIC AUTOMATIC TEMPERATURE CONTROL VALVE
Port size???DN25~300, NPS 1???~ 12???
Pressure???PN16 ~ 100,150LB ~ 600LB
Medium???Water,liquid,air,gas
Temperature :-20???450???
Body material???WCB WC6 WC9 CF8 CF8M
Connection???Flange,welding
Position type???Automatic control
Characteristic???Linear, percentage, quick open
Voltage???AC220V,AC380V, other voltage customed
Other???Pneumatic actuator is optional
ELECTRIC AUTOMATIC TEMPERATURE CONTROL VALVE MATERIAL
Component name : Control Valve Material
Body/Bonnet : WCB/WCC/WC6/CF8/CF8M/CF3M
Valve spool/Seat : 304/316/316L(overlaying stellite alloy)
Packing Normal:-196???150??? is PTFE,RTFE,>230??? is flexible graphite
Bellows : 304/316/316L
Gasket Normal :Stainless steel with flexible graphite,Special:Metal tooth type gasket
Control valve stem : 2Cr13/17-4PH/304/316/316L
???ELECTRIC AUTOMATIC TEMPERATURE CONTROL VALVE PERFORMANCE
Flow characteristic :Linear, percentage, quick open
Allowable range : 50: 1 (CV<6.3 30: 1)
Rated Cv value : Percentage CV1.6~630 ???linear CV1.8~690
Allowable leakage : Metal seal: IV grade???0.01% rated capacity???
Soft seal : VI grade???foam grade???
Electric automatic temperature control valve Performance
Intrinsic error (%)±1.0
Return difference(%) ≤1.0
Dead zone(%) ≤1.0
Difference from beginning to end point(%)±2.5
Rated travel difference(%)≤2.5
ELECTRIC AUTOMATIC TEMPERATURE CONTROL VALVE ACTUATOR PARAMETER
Electric control valve Type\ Method: Electric actuator
Usage : Regulating
Air supply pressure or Power supply voltage Power: AC 200V±10% 50Hz
Or Powerm: AC 380V±10% 50Hz
Connector Normal type: cable inlet 2-PF(G1/2???)
Explosive proof: Protection jacket PF(G3/4???)
Input signal :Input/output4???20mA.DC
Lag ≤0.8%FS
Linear type ≤+1%FS
Environmental temperature Standard type: -10??????+60???
With space heater : -35??????+60???
Explosive proof: -10??????+40???
Product Details:
| Minimum Order Quantity | 50 Piece |
| Brand | SVR |
| Material | Carbon steel,Cast iron,Stainless steel,Ductile iron |
| Fluid Media | Gas, Water, Fuel, Powder, Air |
| Size | DN 50 to DN 2000 |
| I deal in | New Only |
ELECTRONIC 4-20MA REGULATING CONTROL VALVE
Port size???DN25~300, NPS 1???~ 12???
Pressure???PN16 ~ 100,150LB ~ 600LB
Medium???Water,liquid,air,gas
Temperature :-20???450???
Body material???WC, LCB, CF8, CF3, CF8M, CF3M
Connection???Flange
Position type???Signal to open.Signal to close
Characteristic???Linear, percentage, quick open
Voltage???AC220V,AC380V, other voltage customed
ELECTRONIC 4-20MA REGULATING CONTROL VALVE SPECIFICATION
Electronic control valve body type: straight through casting globe type
Spool type : balanced cage guided sleeve ype
Nominal size : DN25~300, NPS 1???~ 12???
Nominal pressure : PN16 ~ 100, CLASS 150LB ~ 600LB
Connection: flange : FF, RF, MF, RTJ
Welding : SW, BW
Flange dimension : According to to IEC 60534
Bonnet type: ???:standard type???-20???~230??????
???:Radiator type: ???-45???~ high than 230??? occasion???
???:Low temperature extended type???-196???~ -45??????
???:Bellow seal type
???:Warm insulation Jacket type
Packing : V type PFTE packing, flex. graphite packing, etc.
Gasket : Metal graphite packing
Actuator of control valve : Electric: 3810L series smart actuator, PSL series actuator.
ELECTRONIC 4-20MA REGULATING CONTROL VALVE MATERIAL
Component name : Control Valve Material
Body/Bonnet : WCB/WCC/WC6/CF8/CF8M/CF3M
Valve spool/Seat : 304/316/316L(overlaying stellite alloy)
Packing : Normal:-196???150??? is PTFE,>230??? is flexible graphite
Bellows : 304/316/316L
Gasket Normal : Stainless steel with flexible graphite,Special:Metal tooth type gasket
Control valve stem : 2Cr13/17-4PH/304/316/316L
ELECTRONIC 4-20MA REGULATING CONTROL VALVE PERFORMANCE
Flow characteristic : Linear, percentage, quick open
Allowable range : 50: 1
Rated Cv value : Percentage CV10~1400 ???linear CV11~1500
Allowable leakage : Metal seal:???grade???0.5% rated capacity???
Soft seal : V grade
Electronic regulating control valve Performance
Intrinsic error (%)±1.0
Return difference(%) ≤1.0
Dead zone(%) ≤1.0
Difference from beginning to end point(%)±2.5
Rated travel difference(%)≤2.5
ELECTRONIC 4-20MA REGULATING CONTROL VALVE ACTUATOR PARAMETER
Electrionic Control Valve Type\ Method : Electric actuator
Usage : Regulating
Air supply pressure or Power supply voltage Power: AC 220V±10% 50Hz
Or Power : AC 380V±10% 50Hz
Connector Normal type : cable inlet 2-PF(G1/2???)
Explosive proof : Protection jacket PF(G3/4???)
Input signal : Input/output4???20mA.DC
Lag : ≤0.8%FS
Linear type : ≤+1%FS
Environmental temperature Standard type: -10??????+60???
With space heater : -35??????+60???
Explosive proof: -10??????+40???
Product Details:
| Minimum Order Quantity | 50 Piece |
| Brand | SVR |
| Material | Carbon steel,Cast iron,Stainless steel,Ductile iron |
| Fluid Media | Fuel, Air, Water, Gas |
| Size | DN 50 to DN 2000 |
| I deal in | New Only |
Product Details:
| Minimum Order Quantity | 50 Piece |
| Brand | SVR |
| Body Material | Carbon steel, Cast iron, Stainless steel, Ductile iron |
| Driving mode | Hydraulic, Electric, Manual |
| Sizes And Class Rating | DN 50 to DN 2000 |
| I deal in | New Only |
ELECTRIC STEAM GLOBE CONTROL VALVE
Port size: DN25~300, NPS 1" to 12"
Pressure: PN16 ~ 100,150LB ~ 600LB
Temperature :-20 to 450 degree celsius
Body material: WCB,LCB,CF8,CF3,CF8M,CF3M
Connection: Flange,welding
Position type: Flow to open,flow to close
Characteristic: Linear, percentage, quick open
Voltage AC220V,AC380V, other voltage customed
Product Details:
| Minimum Order Quantity | 50 Piece |
| Brand | SVR |
| Valve Size | DN 50 to DN 2000 |
| Material | Carbon steel, Cast iron, Stainless steel, Ductile iron |
| Media | Air, Water, Powder/Solids, Gas, Fuel |
| Operating Height | 15 ft, 10 ft, 20 ft, 25 ft |
| Port Size | 1/2 Inch, 1/8 Inch, 1/4 Inch |
| I Deal In | New Only |
PNEUMATIC FLOW REGULATING VALVE
Port size: DN25~300, NPS 1 ~ 12
Pressure: PN16 ~ 100,150LB ~ 600LB
Medium: Water,liquid,air,gas
Body material: WCB, LCB, CF8, CF3, CF8M, CF3M
Connection: Flange
Position type: Fail Closed/Open
Characteristic: Linear, percentage, quick open
Voltage: Depond on solenoid valve
Other: Electric control valve is optional
PNEUMATIC FLOW REGULATING VALVE SPECIFICATION
Body type : straight through casting globe type
Spool type : non-balanced single seat plug type
Nominal size : DN20~200, NPS 3/4 ~ 8
Nominal pressure : PN16 ~ 100, CLASS 150LB ~ 600LB
Connection : flange: FF, RF, MF, RTJ
Welding : SW, BW
Flange dimension : According to to IEC 60534
Bonnet type :standard type -20~230
Radiator type: -45 ~ high than 230 occasion
Low temperature extended type -196 ~ -45
Bellow seal type
Warm insulation Jacket type
Gasket : Metal graphite packing
Regulating control valve Actuator : Pneumatic: multi-spring diaphragm actuator, piston type actuator.
PNEUMATIC FLOW REGULATING VALVE MATERIAL
Component name : Control Valve Material
Body/Bonnet : WCB/WCC/WC6/CF8/CF8M/CF3M
Valve spool/Seat : 304/316/316L(overlaying stellite alloy)
Packing : Normal:-196 150 is PTFE,RTFE,>230 is flexible graphite
Gasket Normal : Stainless steel with flexible graphite,Special:Metal tooth type gasket
Diaphragm Cover : Normal:Q235,Special:304
Diaphragm : NBR with reinforced polyester fabric
Spring : Normal:60Si2Mn,Special:50CrVa
Control valve stem : 2Cr13/17-4PH/304/316/316L
PNEUMATIC FLOW REGULATING VALVE PERFORMANCE
Flow characteristic : Linear, percentage, quick open
Allowable range : 50: 1 (CV<6.3 30: 1)
Rated Cv value : Percentage CV1.6~630 linear CV1.8~690
Allowable leakage Metal seal : IV grade0.01% rated capacity
Soft seal : VI gradefoam grade
Pneumatic flow regulating valve Performance
Intrinsic error % ±1.5
Return difference, % ≤1.5
Dead zone, %≤0.6
Difference from beginning to end point, %±2.5
Rated travel difference, %≤2.5
Product Details:
| Minimum Order Quantity | 50 Piece |
| Brand | SVR |
| Size | DN 50 to DN 2000 |
| I Deal In | New Only |
| Material | Carbon steel,Cast iron,Stainless steel,Ductile iron |
Electric Water Control Valve
Specifications:
1)normal close or normal open solenoid valves, available body: Stainless steel
2)Multiple seals are available for different medium
3)Wide size range from 1/4" to 2", with both thread
The valve body material: SS304
Using fluid: Air, water and oil
Style: Normally closed (turn on the electricity, the solenoid valve will start to work, turn off the electricity the solenoid valve will stop working. ).
Voltage: AC220V DC24V AC380V AC110V allow increase or decrease 10%
Pipe size: 1 /4''-2''
Flow aperture: 2.5mm-50mm
Pressure: 0 ~ 1.0 MPa
Fluid temperature: -5 ~ 150 degress C
Stock: More than 100 pieces
Delivery: Air, sea, express service
odel |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |||||
|
| |||||
|
| |||||
|
| |||||
Product Details:
| Minimum Order Quantity | 50 Piece |
| Brand | SVR |
| Size | DN 50 to DN 2000 |
| Material | Carbon steel,Cast iron,Stainless steel,Ductile iron |
| I deal in | New Only |
ELECTRIC Y TYPE CONTROL VALVE
Port size???DN15-DN300
Pressure???PN10-PN320 CL150-CL1500
Medium???Water,steam
Temperature :-40???450???
Body material???WCB,WC6,WC9,CF8,CF8M,etc.
Connection???SW,BW
Position type???Modulating tyoe
Characteristic???Linear,Equal percentage,quick open
Voltage???AC220V AC380V
Other???Other voltage is optional
ELECTRIC Y TYPE CONTROL VALVE MATERIAL
Component name:Control Valve Material
Body/Bonnet :WCB/WCC/WC6/CF8/CF8M/CF3M
Valve spool/Seat:304/316/316L(overlaying stellite alloy)
Packing Normal :-196???150??? is PTFE,RTFE,>230??? is flexible graphite
Bellows :304/316/316L
Gasket Normal :Stainless steel with flexible graphite,Special:Metal tooth type gasket
Control valve stem:2Cr13/17-4PH/304/316/316L
ELECTRIC Y TYPE CONTROL VALVE PERFORMANCE
Flow characteristic:Linear, percentage, quick open
Allowable range :50: 1 (CV<6.3 30: 1)
Rated Cv value :Percentage CV1.6~630 ???linear CV1.8~690
Allowable leakage :Metal seal: IV grade???0.01% rated capacity???
Soft seal :VI grade???foam grade???
Electric steam temperature control valve Performance
Intrinsic error (%) ±1.0
Return difference(%) ≤1.0
Dead zone(%) ≤1.0
Difference from beginning to end point(%) ±2.5
Rated travel difference(%) ≤2.5
ELECTRIC Y TYPE CONTROL VALVE ACTUATOR PARAMETER
Electric Y type control valve :Type\ Method Electric actuator
Usage:Regulating
Air supply pressure or Power supply voltagePower:AC 200V±10% 50Hz
Or Power: AC 380V±10% 50Hz
Connector Normal type: cable inlet 2-PF(G1/2???)
Explosive proof:Protection jacket PF(G3/4???)
Direct action :Input signal increase, stem descend, valve close.
Reaction :Input signal increase, stem ascend, valve open.
Input signal :Input/output4???20mA.DC
Lag :≤0.8%FS
Linear type :≤+1%FS
Environmental temperature Standard type: -10??????+60???
With space heater : -35??????+60???
Explosive proof : -10??????+40???
Product Details:
| Minimum Order Quantity | 50 Piece |
| Brand | SVR |
| Size | DN 50 to DN 2000 |
| Material | Carbon steel,Cast iron,Stainless steel,Ductile iron |
| I deal in | New Only |
PNEUMATIC BOILER BLOWDOWN CONTROL VALVE
Port size???DN25~50, NPS 1???~ 2???
Pressure???PN25~32Mpa???1500~2500LB???
Medium???Water,steam,gas
Temperature :-29???420???
Body material???WCB A105
Connection???SW,BW,Flange is optioanl
Position type???FC,FO,on-off
Characteristic???Linear, Equal percentage
Voltage???Depond on Actuator
Other???diaphragm or piston actuator is optional
PNEUMATIC BOILER BLOWDOWN CONTROL VALVE TECHNICAL PARAMETER
Trim features???top guided unbalanced trim structure
multi-stage throttle valve plug structure
Body type???straight-through type angle type
Bonnet type???standard type heat dissipation type
Flow characteristic??? equal percentage linear quick open
control valve Size???DN25-50(1”-2”)
Pressure class???PN25, 32Mpa???ANSI 1500, 2500LB???
Leakage class???ASME B16.104 ??????standard type metal seat???
Pipe connection type???flange type butt welding type
Applicable temperature range???less than 420C°
control valve Actuator type???pneumatic diaphragm actuator , pneumatic piston actuator , electric actuator
Product Details:
| Minimum Order Quantity | 50 Piece |
| Brand | SVR |
| Size | DN 50 to DN 2000 |
| Material | Carbon steel, Cast iron, Stainless steel, Ductile iron |
| I Deal In | New Only |
PNEUMATIC DESUPERHEATER CONTROL VALVE
Port size: DN25~50, NPS 1 ~ 2
Pressure: PN25~32Mpa (1500~2500LB)
Medium: Water,oil,steam,gas
Body material: WCB A105
Connection: SW,BW,Flange is optioanl
Position type: FC,FO,on-off
Characteristic: Linear, percentage, quick open
Voltage: Depond on Actuator
Other: Pneumatic or electric actuator is optional
PNEUMATIC DESUPERHEATER CONTROL VALVE PARAMETER
Trim features: labyrinth cage trim , multi-stage throttle valve plug structure
Body type: straight-through type , angle type
Bonnet type: standard type , heat dissipation type
Flow characteristic: equal percentage linear quick open
control valve Size: DN25-50(1”-2”)
Pressure class: PN25, 32Mpa, ANSI 1500, 2500LB
Leakage class: ASME B16.104 standard type metal seat
Pipe connection type: flange type butt welding type
Applicable temperature range: less than 420C°
Actuator type pneumatic diaphragm actuator , pneumatic piston actuator , electric actuator
Product Details:
| Minimum Order Quantity | 50 Piece |
| Brand | SVR |
| Size | DN 50 to DN 2000 |
| Material | Carbon steel,Cast iron,Stainless steel,Ductile iron |
| I deal in | New Only |
PNEUMATIC MAIN STEAM TRAP CONTROL VALVE
Port size???DN25~50, NPS 1???~ 2???
Pressure???PN25~32Mpa???1500~2500LB???
Medium???Water,steam
Temperature :-29???570???
Body material???WC6 WC9 F11 F22
Connection???Flange,welding
Position type???FC,FO,on-off
Characteristic???Linear, Equal percentage, quick open
Voltage???Depond on accessories
Other???Pneumatic or electric actuator is optional
PNEUMATIC MAIN STEAM TRAP CONTROL VALVE PARAMETER
Trim features???labyrinth cage trim , multi-stage throttle valve plug structure
Body type???straight-through type , angle type
Bonnet type???standard type ,heat dissipation type
Flow characteristic???equal percentage linear , quick open
Size??? DN25-50(1”-2”)
Pressure class???PN25, 32Mpa???ANSI 1500, 2500LB???
Leakage class???ASME B16.104 ??????standard type metal seat???
Pipe connection type???flange type , butt welding type
Applicable temperature range???less than 560C°
control valve Actuator type???pneumatic diaphragm actuator , pneumatic piston actuator , electric actuator
Product Details:
| Minimum Order Quantity | 50 Piece |
| Size | DN 50 to DN 2000 |
| Material | Carbon steel,Cast iron,Stainless steel,Ductile iron |
ELECTRIC STEAM TEMPERATURE CONTROL VALVE
Port size ：DN25~300, NPS 1〞~ 12〞
Pressure ：PN16 ~ 100,150LB ~ 600LB
Medium ：Water,steam
Temperature :-20～450℃
Body material：WCB WC6 WC9 CF8 CF8M
Connection ：Flange
Position type ：Automatic control
Characteristic：Linear, percentage, quick open
Voltage ：AC220V,AC380V, other voltage customed
ELECTRIC STEAM TEMPERATURE CONTROL VALVE MATERIAL
Component name : Control Valve Material
Body/Bonnet : WCB/WCC/WC6/CF8/CF8M/CF3M
Valve spool/Seat : 304/316/316L(overlaying stellite alloy)
Packing Normal :-196～150℃ is PTFE,RTFE,>230℃ is flexible graphite
Bellows:304/316/316L
Gasket Normal :Stainless steel with flexible graphite,Special:Metal tooth type gasket
Control valve stem :2Cr13/17-4PH/304/316/316L
ELECTRIC STEAM TEMPERATURE CONTROL VALVE PERFORMANCE
Flow characteristic :Linear, percentage, quick open
Allowable range :50: 1 (CV<6.3 30: 1)
Rated Cv value :Percentage CV1.6~630 ，linear CV1.8~690
Allowable leakage :Metal seal: IV grade（0.01% rated capacity）
Soft seal : VI grade（foam grade）
Electric steam temperature control valve Performance
Intrinsic error (%) ±1.0
Return difference(%) ≤1.0
Dead zone(%) ≤1.0
Difference from beginning to end point(%) ±2.5
Rated travel difference(%) ≤2.5
ELECTRIC STEAM TEMPERATURE CONTROL VALVE ACTUATOR PARAMETER
Electric temperature control valve :Type\ Method Electric actuator
Usage :Regulating
Air supply pressure or Power supply voltage Power: AC 200V±10% 50Hz
Or Power :AC 380V±10% 50Hz
Connector Normal type :cable inlet 2-PF(G1/2〞)
Explosive proof : Protection jacket PF(G3/4〞)
Input signal :Input/output4～20mA.DC
Product Details:
| Minimum Order Quantity | 50 Piece |
| Size | DN 50 to DN 2000 |
| Brand | SVR |
| Material | Carbon steel, Cast iron, Stainless steel, Ductile iron |
HIGH PRESSURE ELECTRIC CONTROL VALVE
Port size: DN25~300, NPS 1~ 12
Pressure: PN16 ~ 100,150LB ~ 600LB
Medium: Water,liquid,air,gas
Temperature :-20 540
Body material: WCB WC6 WC9 CF8 CF8M
Connection: Flange,welding
Position type: Flow to open,flow to close
Characteristic: Linear, percentage, quick open
Voltage:AC380V,AC415V, other voltage customed
Other: Pneumatic actuator is optional
HIGH PRESSURE ELECTRIC CONTROL VALVE SPECIFICATION
Body type : casting globe type
Spool type : cage guiede
Nominal size : DN20~300 NPS 3/4 ~ 12
Nominal pressure : PN100~ 420, CLASS 600LB ~ 2500LB
Connection: flange : RTJ
Welding: SW, BW
Flange dimension : According to to IEC 60534
Bonnet type:standard type -20 ~230
Radiator type:-45 ~ high than 230 occasion
Low temperature extended type -196 ~ -45
Bellow seal type
Warm insulation Jacket type
Packing : V type PFTE packing, flex. graphite packing, etc.
Gasket : Metal graphite packing
Control valve Actuator : electric actuator.
HIGH PRESSURE ELECTRIC CONTROL VALVE MATERIAL
Component name : Control Valve Material
Body/Bonnet : WCB/WCC/WC6/WC9CF8/CF8M/CF3M
Valve spool/Seat : 304/316/316L(overlaying stellite alloy)
Packing : flexible graphite
Bellow : 304,316,316L
Gasket Normal : Stainless steel with flexible graphite,Special:Metal tooth type gasket
Stem : 2Cr13/17-4PH/304/316/316L
Diaphragm Cover : Normal:Q235,Special:304
Diaphragm : NBR with reinforced polyester fabric
Spring Normal : 60Si2Mn,Special:50CrVa
HIGH PRESSURE ELECTRIC CONTROL VALVE PERFORMANCE
Flow characteristic : Linear, percentage
Allowable range : 50: 1 (CV<6.3 30: 1)
Rated Cv value : Percentage 1.6~630/ linear CV1.8~690
Allowable leakage : Metal seal: IV grade 0.01% rated capacity
Electric angle control valve Performance
Intrinsic error(%)±1.0
Return difference(%) ≤1.0
Dead zone(%) ≤1.0
Difference from beginning to end point(%) ±2.5
Rated travel difference(%)≤2.5
Product Details:
| Minimum Order Quantity | 50 Piece |
| Size | DN 50 to DN 2000 |
| Material | Carbon steel,Cast iron,Stainless steel,Ductile iron |
| I Deal In | New Only |
ELECTRIC PRESSURE CONTROL VALVE MATERIAL
Component name : Control Valve Material
Body/Bonnet : WCB/WCC/WC6/CF8/CF8M/CF3M
Valve spool/Seat: 304/316/316L(overlaying stellite alloy)
Packing Normal: -196 150 is PTFE,RTFE,>230 is flexible graphite
Bellows: 304/316/316L
Gasket Normal: Stainless steel with flexible graphite,Special:Metal tooth type gasket
Control valve stem: 2Cr13/17-4PH/304/316/316L
ELECTRIC PRESSURE CONTROL VALVE PERFORMANCE
Flow characteristic : Linear, percentage, quick open
Allowable range50 : 1 (CV<6.3 30: 1)
Rated Cv value : Percentage CV1.6~630 linear CV1.8~690
Allowable leakage : Metal seal: IV grade 0.01% rated capacity
Soft seal : VI grade foam grade
Electric pressure control valve Performance
Intrinsic error (%)±1.0
Return difference(%) ≤1.0
Dead zone(%) ≤1.0
Difference from beginning to end point(%) ±2.5
Rated travel difference(%)≤2.5
ELECTRIC PRESSURE CONTROL VALVE ACTUATOR PARAMETER
Electric control valve Type/ Method : Electric actuator
Air supply pressure or Power supply voltage Power : AC 200V±10% 50Hz
Or Power : AC 380V±10% 50Hz
Connector Normal type : cable inlet 2-PF(G1)
Explosive proof : Protection jacket PF(G3/4)
Input signal : Input/output: 420mA.DC
Lag ≤0.8%FS
Linear type ≤+1%FS
Environmental temperature Standard type: -10+60
With space heater : -35+60
Explosive proof : -10 +40
Product Details:
| Size | DN 50 to DN 2000 |
| Material | Carbon steel,Cast iron,Stainless steel,Ductile iron |
ELECTRIC BOILER FEED WATER CONTROL VALVE
Port size???DN50~300, NPS 2???~ 12???
Pressure???PN25~32Mpa???ANSI 1500~2500LB???
Medium???Water,steam
Temperature :-29???420???
Body material???WCB
Connection???SW,BW,Flange is optioanl
Position type???FC,FO,on-off
Characteristic???Linear, Equal percentage, quick open
Voltage???Depond on Actuator
Other???Pneumatic or electric actuator is optional
ELECTRIC BOILER FEED WATER CONTROL VALVE PARAMETER
Trim features???multi-level, multi-hole cage , balanced trim structure
Body type???straight-through type
Bonnet type??? standard type
Flow characteristic??? equal percentage linear
control valve Size???DN25-50(1”-2”)
Pressure class???PN25, 32Mpa???ANSI 1500, 2500LB???
Leakage class???ASME B16.104 ??????standard type metal seat???
Pipe connection type???flange type , butt welding type
Applicable temperature range???less than 420C°
control Actuator type???pneumatic diaphragm actuator , pneumatic piston actuator , electric actuator
Product Details:
| Minimum Order Quantity | 50 Piece |
| Size | DN 50 to DN 2000 |
| Material | Carbon steel,Cast iron,Stainless steel,Ductile iron |
ELECTRIC MAIN STEAM TRAP CONTROL VALVE
Port size DN25~50, NPS 1 2
Pressure PN25~32Mpa 1500~2500LB
Medium Water,steam
Temperature :-29 570
Body material???WC6 WC9 F11 F22
Connection???Flange,welding
Position type FC,FO,on-off
Characteristic Linear, Equal percentage, quick open
Voltage Depond on Actuator
Other High pressure drop
ELECTRIC MAIN STEAM TRAP CONTROL VALVE PARAMETER
Trim features labyrinth cage trim , multi-stage throttle valve plug structure
Body type straight-through type , angle type
Bonnet type???standard type , heat dissipation type
Flow characteristic??? equal percentage linear , quick open
Size DN25-50(1”-2”)
Pressure class PN25, 32Mpa ANSI 1500, 2500LB
Leakage class ASME B16.104 standard type metal seat
Pipe connection type flange type , butt welding type
Applicable temperature range less than 560C°
Actuator type pneumatic diaphragm actuator , pneumatic piston actuator , electric actuator
Product Details:
| Minimum Order Quantity | 50 Piece |
| Size | DN 50 to DN 2000 |
| Material | Carbon steel,Cast iron,Stainless steel,Ductile iron |
ELECTRIC HIGH PRESSURE BYPASS CONTROL VALVE
Port size???inlet DN125 (5”) outlet DN300(12”)
Pressure???PN25~32Mpa???ANSI 1500~2500LB???
Medium???Water,steam
Temperature :-29???550???
Body material???WC6 WC9 F11 F22
Connection???BW,SW,flanged
Position type???FC,FO,on-off
Characteristic???Linear, Equal percentage, quick open
Voltage???Depond on Actuator
Other???Pneumatic or electric actuator is optional
ELECTRIC HIGH PRESSURE BYPASS CONTROL VALVE PARAMETER
Trim features???multi-level, multi-hole cage , balanced trim structure
Body type???Z type body
Bonnet type??? standard type , heat dissipation type
Flow characteristic??? equal percentage
Size??? inlet DN125 (5”) , outlet DN300(12”)
Pressure class???PN25,32Mpa???ANSI 1500LB???
Leakage class???ASME B16.104 ??????standard type metal seat???
Pipe connection type???Butt welding type
Applicable temperature range???less than 570C°
Actuator type???pneumatic diaphragm actuator , pneumatic piston actuator , electric actuator
Product Details:
| Minimum Order Quantity | 50 Piece |
| Size | DN 50 to DN 2000 |
| Material | Carbon steel,Cast iron,Stainless steel,Ductile iron |
ELECTRIC DESUPERHEATER CONTROL VALVE
Port size???DN25~50, NPS 1???~ 2???
Pressure???PN25~32Mpa???1500~2500LB???
Medium???Water,oil,steam,gas
Temperature :-29???420???
Body material???WCB A105
Connection???SW,BW,Flange is optioanl
Position type???FC,FO,on-off
Characteristic???Linear, Equal percentage, quick open
Voltage???Depond on Actuator
Other???Electric and pneumatic actuator is optional
ELECTRIC DESUPERHEATER CONTROL VALVE PARAMETER
Trim features???labyrinth cage trim , multi-stage throttle valve plug structure
Body type???straight-through type , angle type
Bonnet type???standard type , heat dissipation type
Flow characteristic??? equal percentage linear , quick open
control valve Size??? DN25-50(1”-2”)
Pressure class???PN25, 32Mpa???ANSI 1500, 2500LB???
Leakage class???ASME B16.104 ??????standard type metal seat???
Pipe connection type???flange type butt welding type
Applicable temperature range???less than 420C°
Actuator type???pneumatic diaphragm actuator , pneumatic piston actuator , electric actuator
Product Details:
| Minimum Order Quantity | 50 Piece |
| Material | Carbon steel,Cast iron,Stainless steel,Ductile iron |
| Size | DN 50 to DN 2000 |
| Brand | SVR |
BOILER CONTINUOUS BLOWDOWN CONTROL VALVE
Port size???DN25~50, NPS 1???~ 2???
Pressure???PN25~32Mpa???1500~2500LB???
Medium???Water,oil,steam,gas
Temperature :-29???420???
Body material???WCB A105
Connection???SW,BW,Flange is optioanl
Position type???FC,FO,on-off
Characteristic???Linear, Equal percentage
Voltage???Depond on Actuator
Other???Electric or Pneumatic is optional
BOILER CONTINUOUS BLOWDOWN CONTROL VALVE PARAMETER
Trim features???top guided unbalanced trim structure , multi-stage throttle valve plug structure
Body type??? straight-through type, angle type , Z type
Bonnet type???standard type heat dissipation type
Flow characteristic??? equal percentage linear quick open
Size??? DN25-50(1”-2”)
Pressure class???PN25, 32Mpa???ANSI 1500, 2500LB???
Leakage class???ASME B16.104 ??????standard type metal seat???
Pipe connection type???flange type butt welding type
Applicable temperature range???less than 420C°
control valve Actuator type??? pneumatic diaphragm actuator , pneumatic piston actuator , electric actuator
Product Details:
| Minimum Order Quantity | 50 Piece |
| Material | Carbon steel,Cast iron,Stainless steel,Ductile iron |
| Size | DN 50 to DN 2000 |
| Brand | SVR |
ELECTRIC BOILER BLOWDOWN CONTROL VALVE
Port size???DN25~50, NPS 1???~ 2???
Pressure???PN25~32Mpa???1500~2500LB???
Medium???Water,steam,gas
Temperature :-29???420???
Body material???WCB A105
Connection???BW,SW,flanged
Position type???FC,FO,on-off
Characteristic???Linear, Equal percentage
Voltage???Depond on Actuator
Other???Electric and pneumatic actuator is optional
ELECTRIC BOILER BLOWDOWN CONTROL VALVE TECHNICAL PARAMETER
Trim features???top guided unbalanced trim structure , multi-stage throttle valve plug structure
Body type???straight-through type angle type
Bonnet type???standard type heat dissipation type
Flow characteristic??? equal percentage linear quick open
control valve Size???DN25-50(1”-2”)
Pressure class???PN25, 32Mpa???ANSI 1500, 2500LB???
Leakage class???ASME B16.104 ??????standard type metal seat???
Pipe connection type???flange type butt welding type
Applicable temperature range???less than 420C°
control valve Actuator type???pneumatic diaphragm actuator , pneumatic piston actuator , electric actuator
Product Details:
| Minimum Order Quantity | 50 Piece |
| Material | Carbon steel,Cast iron,Stainless steel,Ductile iron |
| Size | DN 50 to DN 2000 |
| Brand | SVR |
BOILER INTERMITTENT BLOWDOWN CONTROL VALVE
Port size???DN25~50, NPS 1???~ 2???
Pressure???PN25~32Mpa???1500~2500LB???
Medium???Water,air,gas
Temperature :-29???420???
Body material???WCB A105
Connection???SW,BW,Flange is optioanl
Position type???FC,FO,on-off
Characteristic???Linear, Equal percentage
Voltage???Depond on solenoid valve
Other???Diaphragm and piston actuator is for optional
BOILER INTERMITTENT BLOWDOWN CONTROL VALVE TECHNICAL PARAMETER
Trim features???Top guided unbalanced trim structure , multi-stage throttle valve plug structure
Body type??? straight-through type angle type
Bonnet type???standard type heat dissipation type
Flow characteristic??? equal percentage linear quick open
Size??? DN25-50(1”-2”)
Pressure class???PN25, 32Mpa???ANSI 1500, 2500LB???
Leakage class???ASME B16.104 ??????standard type metal seat???
Pipe connection type???flange type butt welding type
Applicable temperature range???less than 420C°
Actuator type???pneumatic diaphragm actuator , pneumatic piston actuator , electric actuator
Product Details:
| Minimum Order Quantity | 50 Piece |
| Size | DN 50 to DN 2000 |
| Material | Carbon steel,Cast iron,Stainless steel,Ductile iron |
| Brand | SVR |
| Valve Type | Two way and three way |
| Fluid Media | Water, Fuel, Air, Gas |
| I deal in | New Only |
ELECTRIC THERMOSTATIC CONTROL VALVE
Port size???DN20~300, NPS 3/4???~ 12???
Pressure???PN16 ~ 100,150LB ~ 600LB
Medium???Water,oil,steam,gas
Temperature :-40???450???
Body material???WCB WCC LCB CF8 CF3 CF8M CF3M
Connection???Flange,thread and SW is optional
Position type???Automatic control
Characteristic???Linear, Equal percentage
Voltage???AC220,AC380
ELECTRIC THERMOSTATIC CONTROL VALVE MATERIAL
Component name :Control Valve Material
Body/Bonnet :WCB/WCC/WC6/CF8/CF8M/CF3M
Valve spool/Seat:304/316/316L(overlaying stellite alloy)
Packing Normal :-196???150??? is PTFE,RTFE,>230??? is flexible graphite
Bellows:304/316/316L
Gasket Normal:Stainless steel with flexible graphite,Special:Metal tooth type gasket
Control valve stem :2Cr13/17-4PH/304/316/316L
???ELECTRIC THERMOSTATIC CONTROL VALVE PERFORMANCE
Flow characteristic:Linear, percentage, quick open
Allowable range 50 : 1 (CV<6.3 30: 1)
Rated Cv value :Percentage CV1.6~630 ???linear CV1.8~690
Allowable leakage :Metal seal: IV grade???0.01% rated capacity???
Soft seal: VI grade???foam grade???
Electric automatic temperature control valve Performance
Intrinsic error (%) ±1.0
Return difference(%) ≤1.0
Dead zone(%) ≤1.0
Difference from beginning to end point(%) ±2.5
Rated travel difference(%) ≤2.5
ELECTRIC THERMOSTATIC CONTROL VALVE ACTUATOR PARAMETER
Electric control valve Type\ Method: Electric actuator
Usage: Regulating
Air supply pressure or Power supply voltage:Power: AC 200V±10% 50Hz
Or Power: AC 380V±10% 50Hz
Connector Normal type:cable inlet 2-PF(G1/2???)
Explosive proof:Protection jacket PF(G3/4???)
Input signal:Input/output4???20mA.DC
Lag:≤0.8%FS
Linear type:≤+1%FS
Environmental temperature Standard type: -10??????+60???
With space heater : -35??????+60???
Explosive proof: -10??????+40???
Electric Thermostatic Control Valve Accessories Space heater (normal type)
Product Details:
| Minimum Order Quantity | 50 Piece |
| Brand | SVR |
| Material | Carbon steel,Cast iron,Stainless steel,Ductile iron |
| Fluid Media | Powder, Water, Fuel, Air, Gas |
| Size | DN 50 to DN 2000 |
| I Deal In | New Only |
ELECTRIC STAINLESS STEEL CONTROL VALVE
Port size : DN25~300, NPS 1" ~ 12"
Pressure : PN16 ~ 100,150LB ~ 600LB
Medium : Water,liquid,air,gas
Temperature : -20~450 degree celsius
Body material : CF8, CF3, CF8M, CF3M
Connection : Flange
Position type : Flow to open, flow to close
Characteristic : Linear, percentage, quick open
Voltage : AC220V,AC380V, other voltage customed
Product Details:
| Minimum Order Quantity | 50 Piece |
| Size | DN 50 to DN 2000 |
| Material | Carbon steel,Cast iron,Stainless steel,Ductile iron |
ELECTRIC HP HEATER DRAIN CONTROL VALVE
Port size???DN65~250, NPS 2.5???~ 10???
Pressure???PN16 ~ 100,150LB ~ 600LB
Medium???Water,steam
Temperature :≤420???
Body material???WCB
Connection???Flange,welding
Position type???FC,FO,on-off
Characteristic???Linear, Equal percentage
Voltage???Depond on accessories
Other???Pneumatic or electric actuator is optional
ELECTRIC HEATER DRAIN CONTROL VALVE PARAMETER
Trim features???multi-level, multi-hole cage,balanced trim structure
Body type???straight-through type
Bonnet type??? standard type ,heat dissipation type
Flow characteristic??? equal percentage linear
Size??? DN65-250(2.5”-10”)
Pressure class???PN1.6, 4.0, 6.3, 10Mpa???ANSI 150, 300, 600LB???
Leakage class???ASME B16.104 ??????standard type metal seat???
Pipe connection type???flange type ,butt welding type
Applicable temperature range???less than 420C°
Actuator type???pneumatic diaphragm actuator, pneumatic piston actuator, electric actuator