SVR VALVES
P N Palayam, Coimbatore, Tamil Nadu
GST No. 33DGZPR2894P2ZZ
TrustSEAL Verified
Call 0804764002877% Response Rate
SEND EMAIL
Product Details:
| Driving mode | Electric, Manual |
| Design | API 602/ANSI B 16.34/BS-EN ISO-1561 |
| Brand | SVR |
| Available Material | Carbon steel, Alloy steel, Stainless steel |
| Ends | Socket weld to ANSI B 16.11/screwed to ANSI B 2.1 |
| Testing | API 598 |
| Size Range | 15-50 mm (1/2-2") |
| Size | 800# | 1500# | 2500# | |||||||
| mm | Inch | A | F | J | A | F | J | A | F | J |
| 15 | ½ | 87 | 170 | 89 | 90 | 178 | 90 | 105 | 181 | 90 |
| 20 | ¾ | 90 | 177 | 89 | 105 | 195 | 90 | 128 | 260 | 145 |
| 25 | 1 | 105 | 90 | 89 | 128 | 145 | 256 | 142 | 276 | 145 |
| 32 | 1.1/4 | 128 | 268 | 146 | 142 | 295 | 152 | * | * | * |
| 40 | 1.1/2 | 128 | 268 | 146 | 142 | 314 | 152 | * | * | * |
| 50 | 2 | 142 | 284 | 146 | * | * | * | * | * | * |
Additional Information:
Product Details:
| Size | 2" to 48" |
| Media | Water |
| Material | WCB, Cast Iron, CS, SS 304, SS316, CF8 |
| Model | WJ41H-16 |
| Brand | SVR |
| Nominal diameter | DN15-300mm |
| Nominal pressure | PN1.0MPa-1.6MPa |
| Suitable medium | Water, gas, oil, ect |
| Suitable temperature | -20 deg C - 350 deg C |
| Part Name | Material |
| Body | GS-C25, C8, CF3 |
| Disc | 2CR13, F304, F316 |
| Axle | F304, F316 |
| Bonnet | GS-25, CF8, CF3 |
| Packing | Flexible graphite, PTFE |
| Gland | 25#, F304, F316 |
| Stem Nut and Cap | Copper alloy ZQA19-4, 25# |
| Oil Cup | Brass |
| Hex Nuts | ASTN193 2H, A193-8 |
| Stud Bolt | ASTN193 2H, A193-8 |
| Gasket | Flexible graphite + SS |
| Stem | 2CR13, F304, F316 |
Additional Information:
Product Details:
| Body Material | Stainless Steel |
| Power | Manual |
| End | Flanged End |
| Automation Grade | Automatic |
| Condition | New |
| Connection Type | Welding, Flange, Thread |
| Material | Cast Iron, Ductile Cast Iron, Carbon Steel |
| Driving mode | Electric, Hydraulic, Manual |
| Brand | SVR |
| Pressure | ANSI 150 ~ 2500, API 1000psi ~ 10000psi, DIN PN 10 ~ PN160, JIS 5K ~ 30K |
| Standards | API 6D, API 6A, DIN, ANSI, BS, JIS |
| Special Range | Double Bleed & Block, Through Conduit, Pressure seal Bonnet |
Application:industrial
Material:Cast Iron, Ductile Iron,Carbon Steel,Alloy
Temperature of Media:High Temperature
Pressure:Medium Pressure
Power:Pneumatic, Pneumatic
Media:Fluid and gas
Port Size:StandardNominal
Size:DN15-DN300O
perating Temperature:-196+593
Nominal Pressure(NA&SA):PN20, 50, 110
Characteristic:Equal percentage, LinearRangeability:50:1
Connection:Flange End
Filler material:PTFE or Flexible Graphite
Standard or Nonstandard:Standard
Product Details:
| Body Material | Stainless Steel |
| Size | 50 - 500 mm |
| Brand | SVR |
| End | Flanged End |
| Driving mode | Manual |
| Automation Grade | Manual |
| Power | Manual |
| Condition | New |
Product Details:
| Brand | SVR |
| Body Material | Cast Iron, Cast Steel |
| End | Screwed Ends, Flanged End |
| Driving mode | Manual |
| Automation Grade | Automatic |
| Size | 2" to 48" |
| Valve Body | Cast Iron |
| Hand Bar | Cast iron |
| Seal Plate | PTFE |
| Valve Stem | Carbon Steel |
| Model | J11T-16 |
| Nominal diameter | DN15-50mm |
| Nominal pressure | PN1.0MPa-1.6MPa |
| Suitable medium | Water,gas,oil,ect |
| Suitable temperature | -20 deg C - 180 deg C |
Technical data:DN: DN15-65Class: PN10,16
Pressure:Medium Pressure, Low Pressure
Media:Water
Temperature of Media:Medium Temperature
Power:Manual, Manual globe valve
Port Size:DN15-65
Valve Body: Cast iron globe valve ,cast steel globe valve Seal :EPDM /PTFE/Stainless steel globe valve
Pressure :PN16 Globe valveSurface
Treatment: Anti-rust Oil
Application: Portable water,Water Distribution Service & Feed Lines, sewage disposol, irrigation, fire protection pipe systerm, Sewage Disposal, Irrigation etc.
Material specifications:Valve Body Hand Bar Cast IronSeal Plate PTFEValve Stem Carbon Steel
Product Details:
| Minimum Order Quantity | 50 Piece |
| Brand | SVR |
| Design | Api,astm a105 |
| Body Material | Wc6 |
| Application | Steam,water |
Product Details:
| Media | Gas, Oil, Water |
| Size | 2" to 48" |
| Brand | SVR |
| Driving mode | Manual |
| End | Flanged End |
| Condition | Refurbished |
| Body Material | CAST IRON |
| Power | Hydraulic |
Cast Iron Globe Valves are designed and manufactured to ensure low leakage to international standards, extensive base line laboratory testing(static and cycle testing) has been performed establishing critical design parameters necessary to achieve low emission sealing in the stem packing seal area and in the bonnet gasket sealing area, in-house testing procedure has been developed and is periodically performed to ensure that standard product design and manufacturing criteria consistently result in the cast iron globe valve meeting a maximum of leakage prior to shipment.
Specifications:
Size Range: 2″-12″
Pressure Ratings: Class125, 150
Ends Connection: Flanged, Clamp
Standards compliance: ASME B16.34, EN1171, DIN 3202, BS 4504, ASME B16.10, BS EN558, ASME B16.1 CLASS 125, ASME B16.5 CL150, EN1092, EN12226, ISO 5208, API 598
Materials: Cast Iron, Ductile Iron
Option Direct Mounting to ISO 5211
Optional Stem Nut or hand wheel, Epoxy Coating
Regular bore
Seat Materials: NBR, EPDM, Brass or Bronze
Product Details:
| Brand | SVR |
| Body Material | Stainless Steel |
| Media | Gas, Water |
| End | Flanged End, Screwed Ends |
| Driving mode | Hydraulic, Manual, Electric |
| Pressure | Low Pressure,Medium Pressure,High Pressure |
| Automation Grade | Manual |
| Connection Type | Flange,Welding,Thread |
| Size | 1/2 to 24 inch |
Jacket Globe Valves are designed and manufactured with a jacket to ensure the medium’s temperature and also have normal globe valves to BS1873, Rising Stem and Non Rising handwheel, solid disc in Plug, Ball or needle type, enlarged flanged to make sure the enough space for the jacket.
– Size Range: 1 1/2″~24″
– Pressure Ratings: Class150~2500
– Ends Connection: FF, RF, RTJ
– Standards compliance: BS1873, ASME B16.34 or equivalents
– Materials: Cast Carbon Steel, Stainless Steel, Duplex or other Specials
– Option Direct Mounting to ISO 5211
– Reduce Port
1.6Mpa
|
Size |
DN |
15 |
20 |
25 |
32 |
40 |
50 |
65 |
80 |
100 |
125 |
150 |
|
L |
mm |
170 |
190 |
210 |
230 |
260 |
300 |
340 |
380 |
430 |
490 |
550 |
|
H |
mm |
250 |
292 |
340 |
348 |
360 |
410 |
440 |
540 |
560 |
625 |
720 |
|
W |
mm |
120 |
140 |
160 |
160 |
160 |
240 |
240 |
280 |
320 |
360 |
360 |
|
G |
Inch |
3/8” |
3/8” |
3/8” |
1/2” |
1/2” |
1/2” |
1/2” |
1/2” |
1/2” |
1/2” |
1/2” |
2.5~4.0Mpa
|
Size |
DN |
15 |
20 |
25 |
32 |
40 |
50 |
65 |
80 |
100 |
125 |
150 |
|
L |
mm |
170 |
190 |
210 |
230 |
260 |
300 |
340 |
380 |
430 |
490 |
550 |
|
H |
mm |
250 |
292 |
340 |
348 |
360 |
410 |
440 |
548 |
560 |
625 |
720 |
|
W |
mm |
120 |
140 |
160 |
160 |
160 |
240 |
240 |
280 |
320 |
360 |
360 |
|
G |
Inch |
3/8” |
3/8” |
3/8” |
1/2” |
1/2” |
1/2” |
1/2” |
1/2” |
1/2” |
1/2” |
1/2” |
Product Details:
| Minimum Order Quantity | 50 Piece |
| Brand | SVR |
| Material | Ductile Iron,Cast Iron,Stainless Steel |
| Connection Type | Thread,Flange,Welding |
Specification:
Material: ductile iron, casting steel, stainless steel
Pressure: Low Pressure
Media: water,acid,oil,alkaline
Structure:Flange
Standard or Nonstandard:Standard
Body material:Ductile Iron,casting steel, stainless steel
Connection:Flange
Function:Cut off/Closure.
Feature:Anti-corrosion,Simple structure,Sealing feature is good.
Lined material:PTFE FEP PFA PO FRPP
Application: chemical,petroleum,medicine,fertilizer,colliery etc, Petorleum,
Temperature of Media:≤180???
Port Size:DN40-DN1200
Parts Name Materials
Valve Body,Bonnet,Disc : WCB lining rubber, Liner fluorine plastic
Stem,Disc : 35lining rubber, Liner fluorine plastic
Hand wheel : HT200
Nominal pressure(Mpa) : 1.0, 1.6
suitable temperature(???) : ≤85,≤150
suitable medium : strong acid,alkali and kinds of organic solvent
(fusion alkali metal and element fulorine
Product Details:
| Minimum Order Quantity | 50 Piece |
| Brand | SVR |
| Temperature | Low Temperature |
| Material | CF8M,Ductile Iron |
Body:ASTM A351 CF3M/CF8M (Flanged)Cover ASTM A351 CF3M/BS EN 10088-3 1.4404Loose Bonnet Flange ASTM A351 CF8MDisc ASTM A351 CF8M/1.4401
Stem:BS EN 10088-3 1.4401 (316 St. St.)
Gasket:Graphite (316 St. St. Reinforced)
Gland Packing:Graphite Fasteners ASTM A320 B8M / ASTM A194 8MDN15, 20, 25, 40, 50, 65, 80, 100 & DN150
Temperature range:-196°C to + 80°C
End Connection: Butt Weld (ANSI b16.25) and Flange (ANSI B16.5)
Shell wall thickness:accordance with ANSI B16.34
Product Details:
| Minimum Order Quantity | 50 Piece |
| Brand | SVR |
| Material | Carbon steel,Cast iron,Stainless steel,Ductile iron |
| Size | DN 50 to DN 2000 |
| I Deal In | New Only |
Body, Bonnet : WCB(ZG230-450), WCC(ZG270-500),WC6(ZG15CrMo)
CF8(304), CF8M(316), CF3(304L), CF3M(316L)
Plug,Seat : 304(0Cr8Ni9), 316(0Cr17Ni2Mo2), 316L(00Cr17Ni14Mo2)
Packing : PTFE, R.TFE, Graphite
Sealing Ring : XB350, PTFE
Stem : 304, 316, 316L, 17-4PH
Product Details:
| Material | Stainless Steel |
| Pressure | High Pressure |
| Connector Type | Flanged End |
| Usage/Application | Oil |
| End Connection Type | Flanged |
| End Connection | Butt Weld |
| Automation Grade | Automatic |
| Is It ISO Certified | ISO Certified |
| Is It Branded | Branded |
| Power | Manual |
| Fire Safe | Yes |
| I Deal In | New Only |
| Rust Resistant | Yes |
We SVR Global, leading manufacturer, exporter and importer of Valves like Ball Valve, Butterfly valve, Trunnion mounted valve, Gate valve, Forged gate, Ball, Butterfly and Check valve. We supply all approved valves for Oil refinery in Middle east, Asia, Africa
Product Details:
| Minimum Order Quantity | 50 Piece |
| Size | DN 50 to DN 2000 |
| Material | Ductile Iron,Corbon steel |
| Brand | SVR |
Specification:
Size:1/4" to 2"
Pressure rating : CL150 to CL1500,DN8 to DN50
Material: Body : A105N,LF2,F11+HF,F304(L),F316(L),
Disc : 304,F304(L),F316(L),
Stem : 410,304,304(L),316(L)
Bonnet : A105N,LF2,F11+HF,F304(L),F316(L)
Operated type: Handwheel
Structure: Rising stem for water control
Flange connection: EN1092 PN16, PN25, PN40:ANSI B16.5:JB79
Butt-weld ends: ASME B16.25:JB/T12224
Socket-weld ends: ASME B16.11:JB/T1751
Screwed ends(NPT): ANSI/ASME B1.20.1:JB/T7306
Medium: W.O.G
Temperature: 20 to 425°C
Product Details:
| Minimum Order Quantity | 50 Piece |
| Material | Ductile iron,Carbon Steel,Stainless steel |
| Brand | SVR |
| Size | DN 15 to DN 400 |
| Driving mode | Manual, Electric, Hydraulic |
| Body Material | Carbon Steel,Ductile iron,Stainless Steel |
Product Details:
| Minimum Order Quantity | 50 Piece |
| Brand | SVR |
| Material | Carbon Steel |
| Temperature | ia High Temperature |
| End Connection | Butt Weld, Socket Weld |
Part name Material
Grease nipple :Brass
Grub screw :Carbon steel
Hand wheel nut :Carbon steel
Hand wheel :Malleable lron/cast steel ducile lron
Yoke nut :Carbon steel/stainless steel
Eye bolt and nut :A 193 B7/A194 2H~A193 B8/A194 8
Pin :Carbon steel/stainless steel
Stem nut :A 439-D2/cu-alloy
Gland flange :Carbon steel~stainless steel
Gland :Stain less steel
Gland bush :Carbon steel~stainless steel
Back seat :Stainless steel
Disc nut :CS+SS/SS/SS+STL
Stem :Stainless steel
Seat ring :CS+SS/SS/SS+STL(See body material)
disc :CS+SS/SS/SS+STL(See body material)
Part name: WCB LCB WC6 WC9
Stud and nut: A193GrB7/A194Gr2H A193GrB7/A194Gr4 A193GrB16/A194 Gr4/7 A193GrB16/A194Gr4/7
Gland packing :Graphite Graphite Graphite Graphite
Gasket: Soft lron Soft lron Ss304 Ss304
Thrust ring :A105 A182F304 A182F11 A182 F22
Back up ring :A105 A182 F304 A182 F11 A182 F22
Yoke :A216 Gr WCB A352 Gr LCB A271 Gr WC6 A271 Gr WC9
Bonnet :A216 Gr WCB A352 Gr LCB A271 Gr WC6 A271 Gr WC9
Body :A216 Gr WCB A352 Gr LCB A271 Gr WC6 A271 Gr WC9
Product Details:
| Minimum Order Quantity | 50 Piece |
| Brand | SVR |
| Body Material | Carbon steel, Cast iron, Stainless steel, Ductile iron |
| Material | Carbon steel, Cast iron, Stainless steel, Ductile iron |
Available Medium: Water, Steam, Petroleum Products
Body : Cast iron
Seat Ring : Brass/ Stainless SteelDisc : Cast Iron +Brass/Stainless Steel
Steel Ball : DN25 Iron wire
Gasket : Graphite
Bolt Nut : Carbon Steel
Stem : Stainless Steel
Packing : Graphite
Gland : Cast iron
Bonnet : Cast iron
Stem Nut : Brass
Bolt Nut : Carbon Steel
Bolt : Carbon Steel
Wheel : Cast iron